Reliable Continuous Emission Monitoring

Advanced Technology Gas Analyzers

24-Hour Expert Emergency Service

SIGNAL USA presents the AMBIRAK mobile Air Quality Monitoring system for the measurement of Oxides of Nitrogen (NOX), Carbon Monoxide (CO), Sulfur Dioxide (SO2), Hydrogen Sulfide (H2S), Methane/non-Methane Hydrocarbon (THC), Ozone (O3) and Ammonia (NH3). Includes a datalogger, paperless chart recorder and remote communications in a compact, wheeled housing.

AMBIRAK

  AMBIRAK AQM System Data Sheet                     

 Ambient AQM System

AMBIRAK is an extractive multigas analyser system for continuous emission monitoring. It is normally used to measure the concentration of oxides of nitrogen (NOx), wet oxygen (O2) and the hydrocarbons (HC) in the flue gas of large combustion processes, incinerators and other processes when it is required by legislation.  

Emirak 2

  Emirak 2 System Data Sheet                      

 Cold/Dry Extractive CEMS

 Emirak 2 is an extractive multigas analyser system for continuous emissions monitoring. It is normally used to measure the concentration of oxides of nitrogen (NOx), sulphur dioxide (SO2), carbon monoxide and dioxide (CO, CO2) and oxygen (O2) in the flue gas of large combustion processes, incinerators and other processes when it is required by legislation.

Emirak 3

  Emirak 3 System Data Sheet                     

Hot/Wet & Cold/Dry Extractive CEMS

Emirak 3 is an extractive multigas analyser system for continuous emission monitoring. It is normally used to measure the concentration of oxides of nitrogen (NOX), sulphur dioxide (SO2), carbon dioxide (CO, CO2), oxygen (O2), hydrocarbons (HC) and water vapour (H2O) in the flue gas of large combustion processes, incinerators and other processes when it is required by legislation

Emirak 3

  Model 1813 Gas Probe Data Sheet

Adobe Acrobat Reader is required to read PDF files.
Get the latest version by clicking here.